Product Specifications

Full Color Asynchronous Control Card

HD-C16C

V0.1 20210408

System Overview

HD-C16C Full Color Asynchronous Controller System is a LED control system that supports mobile APP wireless management, Web-based cloud remote control, relay function for remote switch on/off power supply and 60Hz frame HD video image output and it support 524,288 pixels control capacity.

Supported computer software HDPlayer, mobile phone control software LedArt and HD Cloud Platform.

HD-C16C integrated sending card and receiving card function, can single cassette with small screen, can also add HD-R series receiving card to control bigger screen.

Controlling System Configuration

Control mode

1. Internet unified management: The player box can be connected to the Internet through 4G (optional), network cable connection, or Wi-Fi Bridge.

2. Asynchronous one-to-one control: Update programs by network cable connections, Wi-Fi connections or USB flash drives. LAN (cluster) control can access the LAN network through by network cable connection or Wi-Fi Bridge.

Program Features

• Control Range: 120,000 pixels (384*320).
• 4GB memory, support expending memory by U-disk.
• Support HD video hardware decoding, 60Hz frame rate output.
• Support widest 8192 pixels, Highest 512 pixels.
• No need set IP address, it could be identified by controller ID automatically.
• Unified management of more LED display through Internet or LAN.
• Equipped with Wi-Fi function, Mobile APP management directly.
• Equipped with 3.5mm standard audio interface output.
• Meanwhile support to add 4G networking module connect to Internet (Optional).
• Equipped with 10 lines HUB75E port, can be used for one receiving card.
• Equipped with 1 group of relay module, support switch on/off power supply directly remotely.

System Function list

Dimension Chart

HD- C16C dimension chart follow：

Interface Description

1.Power Supply port: connected 5V DC power supply.
2.Output network port: 1Gbps network port, connect to receiving card.
3.Input Network port: Connect to PC or router.
4.Audio output port: support standard two-track stereo output.
5.USB port: connected to USB device, e.g. U-disk, Mobile hard disk etc.
6.Wi-Fi antenna connection port: connect with external Wi-Fi antenna.
7.4G network antenna connection port: connect with external 4G antenna.
8.Test button: LED screen burn-in test
9.4G indicator light: display 4G network status.
10.Mini PCIE port: connect with 4G networking module for cloud control (Optional).
11.Display indicator light: working status is Flicking.
12.HUB75E port: connect to LED modules with flat cable.
13.Reserved interface, no definition.
14.Temp sensor connection port: connect to temperature sensor and show the real-time value.
15.Relay control connection port: the power supply connection port of the relay
16.GPS port: connected GPS module.
17.Sensor port: connect S108 and S208 sensor kit.
18.Controller working state indicator light: PWR is Power lamp for status of power supply, when working normally, the lamp is always on, RUN is running lamp, when working normally, the lamp will be blinking.
19.Fool-proof power interface: 5V DC power interface, with fool-proof design, with the same function as the “1” 5V DC terminal.

Interface Definition

Onboard 10 HUB75E port (2*8pin)

8.Basic Parameters

Precaution

1) To ensure that the control card is stored during normal operation, make sure the battery on the control card is not loose,

2) In order to ensure the long-term stable operation of the system; please try to use the standard 5V power supply voltage.