Any electronic product needs to be maintained after being used for a period of time, and the LED display is no exception. In the process of using, not only need to pay attention to the method, but also need to maintain the display, so as to make the life of the large LED display screen longer. Many customers do not understand the precautions for the operation and use of the LED display, which may eventually lead to a significant reduction in the life of the LED display. So how to maintain the LED display, the following points need special attention.
1. Don't stay in full-white, full-red, full-green, full-blue and other full-bright screens for a long time during playback, so as not to cause excessive current, excessive heating of the power cord, damage to the LED light, and affect the service life of the display.
2. Do not disassemble or splice the screen at will! Technical maintenance needs to contact the manufacturer.
3. In the rainy season, the large screen of the LED display should be kept at a power-off time of more than 2 hours a day. Although lightning rods are installed on the display screen, in strong typhoons and thunderstorms, the display screen should be turned off as much as possible.
4. Under normal circumstances, the led display is turned on at least once a month and lasts for more than 2 hours.
5. Exposure to outdoor environment for a long time, such as wind, sun, dust, etc. After a period of time, the screen must be a piece of dust and needs to be cleaned in time to prevent dust from wrapping the surface for a long time and affecting the viewing effect. For maintenance and cleaning, please consult Shengke Optoelectronics technicians.
6. In addition to the above introduction, the switching sequence of the LED display is also very important: first turn on the control computer to make it run normally, then turn on the large screen of the LED display; turn off the LED display first, and then turn off the computer.
Post time: Nov-19-2021
